![background image](http://html1.mh-extra.com/html/omron/medium-and-heavy-payload-series/medium-and-heavy-payload-series_hardware-installation-manual_743976010.webp)
Regular Payload Series-Hardware Installation Manual TM5 Series
10
Ensuring the user will not modify any safety-related measures
Ensuring all systems are correctly designed and installed
Clearly labeling user instructions
Clearly marked symbols for installation of the robot arm and the integrator contact details
Collecting all documents into the technology folder, including the risk assessment, and this Manual
CAUTION:
This product is a partly complete machine. The design and installation of the complete system
must comply with the safety standards and regulations in the country of use. The user and
integrators of the robot should understand the safety laws and regulations in their countries
and prevent major hazards from occurring in the complete system.
2.5 Limitations on Liability
Even if the safety instructions are followed, any safety-related information in the Manual shall not be considered
as a guarantee that the product will not cause any personal injury or damage.
2.6 General Safety Warning
1.
The actual noise measured in a factory setting is about 49.3dB under without production. (Condition: leave
machine body 1m distance and at 1.6m height from the floor and 8% of maximum speed). If the sound pressure
is over 80 dB(A) while operating, wear proper ear protection.
2.
Environmental Conditions:
Ambie
nt air temperature: 0˚C ~ +50˚C
Ambient relative humidity: < 85%
Transportation & Storage condition: -
20˚C ~ +60˚C
Transportation & Storage humidity: < 75%
The robot needs to be protected from shock or vibration
Observe ESD precautions when installing or removing robot
2.7 Risk Assessment
Before installing or using this product, the user must first carry out the necessary risk assessment based on the
conditions of use; meanwhile also closely study the potential remaining risk addressed by OMRON. Refer to and
abide by the relevant chapters in Safety Manual in accordance with its’ software and hardware version.