![background image](http://html1.mh-extra.com/html/omron/medium-and-heavy-payload-series/medium-and-heavy-payload-series_hardware-installation-manual_743976050.webp)
Regular Payload Series-Hardware Installation Manual TM5 Series
50
5.4.2 Connecting Tool End Digital Output
The following figure shows how to connect the tool end digital output:
5.4.3 Connecting Tool End Digital Input
The following figure shows how to connect the tool end digital input:
NOTE: If sensors are connected directly then they should be NPN.
5.4.4 Connecting Tool End Analog Input
Input range of -
10.00 V ~ +10.00 V
.
The following figure shows how to connect the tool end Analog input:
(Because AIN_GND is connected to ground, when AIN is a dead contact, a pressure difference will occur,
which is a normal phenomenon.)
-
+