KP100G
27
RS-232C
If the RS-485 card is inserted, RS-232C is not available. To use RS-232C interface, remove RS-485 card.
The RS-232C interface has a protection cover, which can be unbolted and removed with a screwdriver as shown in Fig, 5-31 and. Fig, 5-32.
Fig, 5-31 RS-232C interface Fig, 5-32 Socket available for RS-232C connection
KP100G uses a DB9 socket for the RS-232C interface. Remove the DB9 socket cover before use. The pin assignment of this DB9 socket is listed
In.Table 5-2.
Table 5-2 Pin assignment
Pin Signal
Assignment
1 N.C.
2 TxD
3 RxD
4 N.C.
5 Common
6 N.C.
7 N.C.
8 N.C.
9 N.C.
N.C. means “No Connection
Fig, 5-33 Female connector
Remove
these screws
5 4 3 2 1
9 8 7 6
Female
Side
Summary of Contents for KP100G
Page 1: ...KP100G Technical manual Grid Connect Photovoltaic Inverter Part number 1868180 8 A...
Page 50: ...KP100G 50 EC DECLARATION OF CONFORMITY...
Page 51: ...KP100G 51 Technical Report...
Page 52: ...KP100G 52 Declaration of Conformity RD1663 2000...