Omron KP100G, Technical Manual

Page: 15 / 54

KP100G
15
5. Installation
Installation Procedure
Use the following procedure to install the Unit.
Table 5-1 Installation Procedure
No. Item Procedure Reference Page
1 Checking package contents
Check to make sure that all of the items listed on the reference
page are included in the package. 15
2 Mounting the base plate
Use the enclosed mounting screws to mount the base plate to the
wall, according to the procedure described on the reference page. 19
3 Mounting the Unit
Mount the KP100G to the base plate, according to the procedure
described on the reference page. 20
4 Processing the plugs
Follow the procedures on the reference pages to process the
communications plug and AC plug. 22
5 Wiring the Unit
Wire the KP100G to the grid, and to the solar modules, as
described in Fig, 5-34 and Fig, 5-35 on the reference page. 28
6 Preliminary Confirmations
Execute the preliminary confirmation according to the procedure
described on the reference page. 28
7 Completion Inspection
Conduct the completion inspection according to the procedure
described on the reference pages. 30
Mounting
Package Contents
The following items are included in the KP100G package. Check that all of the items shown in the following are included in the package before you
start the installation.
KP100G, Mounting base plate, Technical Manual
Fig, 5-1 KP100G, Mounting base plate, Technical manual
Enclosed mounting screws
6 Mounting Screws 6 Snap Bushings 2 Safety-lock screws
Fig, 5-2 Enclosed mounting screws