manualshive.com logo in svg

Omron K3NX, Operation Manual

Share
Download
Omron K3NX Operation Manual Download Page 37

29

2. Press the Shift Key to display the prior set value 

199.99

 for changing. The

PROG indicator will flash.

Set Value LED Display Model

Basic Model

3. Press the Up and Shift Keys to set the value to 

005.00

. The input will be vali-

dated automatically if no change is made for five seconds. The 

inp.2

 input

value 2 setting will be displayed again.

Note Press the Mode Key to enter the set value immediately. The 

dsp.2

 dis-

play value 2 setting will be displayed for setting the next parameter.

Set Value LED Display Model

Basic Model

4. Press the Mode Key to display the 

dsp.2

 display value 2 setting.

Set Value LED Display Model

Basic Model

5. Press the Shift Key to display the set value 

19999

 for changing. The PROG

indicator will flash.

Set Value LED Display Model

Basic Model

6. Press the Up and Shift Keys to set the value to 

10000

. The input will be vali-

dated automatically if no change is made for five seconds. The 

dsp.2

 display

value 2 setting will be displayed again.

Note Press the Mode Key to enter the set value immediately. The 

inp.1

 in-

put value 1 setting will be displayed for setting the next parameter.

Set Value LED Display Model

Basic Model

7. Press the Mode Key to display the 

inp.1

 input value 1 setting.

Set Value LED Display Model

Basic Model

Setting Mode

Section 3-2

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]

Summary of Contents for K3NX




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands