manualshive.com logo in svg

Omron K3NX, Operation Manual

Share
Download
Omron K3NX Operation Manual Download Page 30

22

Setting Mode

Section 3-2

Power On

Press the Mode and Shift Keys
while turning the K3NX on.

Maintenance Mode

Refer to Section 5 Useful Functions.

RUN Mode

Refer to Section 4 RUN Mode Operations.

Press the Escape and
Up Keys for 1 second.

Press the Mode
Key for 1 second.

Protect Mode

Refer 3-3 Protect Mode.

Setting Mode

Setting value menu

Press the Mode Key for 1 second.

HH setting value

H setting value

L setting value

LL setting value

Press the Mode Key for 1 second.

Scaling menu

Input value 2

Display value 2

Input value 1

Display value 1

Decimal position

–19999 to 99999

Output test

Refer to Section 5
Useful Functions.

Option menu

Average processing

Startup compensa-
tion time

Hysteresis

H linear output
range

L linear output
range

Comparative output
pattern

Note 2:

The K3NX stops measurement
in setting mode.

Some menus cannot be set ac-
cording to the Output Board se-
lected.

If the input range is changed, all
the other parameters are set to
default values. Therefore, set
the input range first.

Press the Mode Key for 1 second.

Press the Mode Key for 1 second.

Setup Menu

Input range

Power supply
frequency

Communications
unit number

Baud rate

Word length

Stop bits

Parity bits

Remote/Local pro-
cessing

3-2-2 Menu Overview

Press the Escape Key.

Press the
Escape Key.

Press the
Escape Key.

(see note 1)

Note 1:

When making new settings
or changing settings of each
parameter, press the Shift
Key to shift to the setting
state.

The input will be updated
automatically if no change is
made for five seconds.

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]

Summary of Contents for K3NX




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands