Omron GRT1 - 27-11-2006, Operation Manual

Page: 26 / 111

7
GRT1-PRT Configuration
Section 1-3
External Dimensions (mm)
1-3 GRT1-PRT Configuration
PROFIBUS Configuration
Means The PROFIBUS DP Master Unit requires a configuration before it can
exchange I/O data with any of its slave devices. For this configuration infor-
mation on the slave device must be available. OMRON provides two means
to facilitate Master Unit configuration.
• A GRT1-PRT DTM
• A GRT1-PRT GSD file
GRT1-PRT Configuration
DTM The GRT1-PRT DTM is an executable component, provided by OMRON,
which requires an FDT Container program like OMRON’s Cx-Profibus (refer
also to Appendix
A-9 FDT/DTM Technology
). The DTM runs inside this FDT
Container and provides its own User Interfaces. It can access GRT1-PRT and
SmartSlice I/O Unit data through the PROFIBUS Master unit and present that
to the user. It can also save the settings, using the features of the FDT Con-
tainer program.
The GRT1-PRT DTM, provides the user with the following features.
• Parameter configuration
• I/O Configuration
• Configuration of individual SmartSlice I/O Units
• Monitoring of the SmartSlice I/O System
Note In order to configure individual SmartSlice I/O Units, the PROFIBUS Master
Unit must support PROFIBUS DP-V1, Class 2 functionality. The OMRON
CS1/CJ1W-PRM21 PROFIBUS Master Units support this functionality as of
revision 3.
X10 X10 X1 X1
0
2
3
4
5 6
7
8
9
1
0
2
3
4
5 6
7
8
9
1
BUS BUS
ON ON
25
25
+V +V
- V
+V +V
-V -V
UNIT UNIT
DC24V DC24V
INPUT
INPUT
REGS REGS
NC
NC
ADR
ADR
BACK
BACK
1
2
3
4
RUN RUN
ERR ERR
BF BF
TS TS
UNIT PWR UNIT PWR
I/O PWR I/O PWR
OMRON GRT1-PRT
24.4
23.1
61.2
69.7 1.5
17.1
36.8
58
2.4
16.2
43.7
83.5
2.9
2.9
11.9