When Using Measurement Results Externally (3D Result Display)
External Reference List
The data types and their numbers that are available to refer from other processing units
and external devices are shown below. For the input method, see "Input Format" in
User's Manual, "How To Connect & Communicate With External Devices"
.
Table: External Reference Data List (3D Result Display)
No.
Data Name
Set/Get
Data Range
0
Judge
Get
only
0: No judgement (unmeasured)
1: Judgement result OK
-1: Judgement result NG
140 Azimuthal
ș
Set/Get 0 to 359
141 Elevation
ij
Set/Get 0 to 90
142 Magnification
Set/Get -1.0 to 1.0
143 Z scale
Set/Get -1.0 to 1.0
144 Movement X
Set/Get
For a camera with over 640 x 480 pixels: -800 to 800
For a camera with 640 x 480 pixels or less: -320 to 320
145 Movement Y
Set/Get
For a camera with over 640 x 480 pixels: -600 to 600
For a camera with 640 x 480 pixels or less: -240 to 240
146 Mesh
Set/Get ON: 1, OFF: 0
147 Mesh color R
Set/Get 0 to 255
148 Mesh color G
Set/Get 0 to 255
149 Mesh color B
Set/Get 0 to 255
150 Mesh line type
Set/Get 0: Solid, 1: Broken
151 Mesh width X
Set/Get
Expression string (256 characters or less)
When the value of the expression is a negative number,
the image is not displayed in the image region.
152 Mesh width Y
Set/Get
Expression string (256 characters or less)
When the value of the expression is a negative number,
the image is not displayed in the image region.
153 Mesh width Z
Set/Get
Expression string (256 characters or less)
When the value of the expression is a negative number,
the image is not displayed in the image region.
154 Mesh height Z
Set/Get Expression string (256 characters or less)
155 BG color
Set/Get ON: 1, OFF: 0
156 Background
Set/Get 0 to 255
Summary of Contents for FZ2 Series
