Table: Model (ECM Search) - Model Parameter
Setting Item
Set Value
[Factory Default]
Description
Rotation
o
Checked
o
[Unchecked]
Specify whether to rotate the
model.
Upper -180 to [180]
Angle
range
Lower [-180] to 180
Specify the upper and lower limit
values for "Angle range" (rotation
angle) during a search. The
normal direction is clockwise.
Settings must satisfy: lower limit
upper limit.
Skipping
angle
1 to 30
[5]
Specify the stepping angle (in
degrees) by which the model is
rotated to create rotated models. A
smaller angle increases stability,
but slows down the processing.
Reverse
o
Checked
o
[Unchecked]
Specify whether to allow reverse
of lights and darks for the model.
Size change
o
Checked
o
[Unchecked]
Specify whether to allow size
change for the model.
When checked, tap [Detail] and
specify a value for each item.
o
If necessary, check "Rotation" and specify a value for each rotation item.
For "Angle range" and "Skipping angle", tap [...] and specify a range of
the rotation angle.
How to input a value:
User's Manual, "Inputting a Value"
The [Skipping angle] value can be adjusted by tapping [<] or [>].
o
If necessary, check the "Reverse" or "Size change" option.
2. When the "Size change" option is checked, tap [Detail].
The "Model parameter: Size change" area is displayed.
Summary of Contents for FZ2 Series
