[Setting (3D Calculation)]
Set up each expression.
Note
When you need to output calculation results to an external device, specify the
output processing unit after [3D Calculation] in the Edit Flow window.
Calculation results cannot be output to external devices when you only set up
expressions.
Result Output
1. In the "Item tab" area, tap [Setting].
2. In the "3D Expression" area, tap [
] and select a calculation method
Table: Setting (3D Calculation) - 3D Expression - Method
Setting
Item
Set Value
[Factory
Default]
Description
[3D Position]
The X-/Y-/Z-coordinates (mm) are calculated based
on the X-/Y-coordinates obtained from each camera.
3D world
coordinates
position
Coordinates are converted from the camera coordinate
system into a world coordinate system. World
coordinates are calculated using the parameters from
[World coordinates] in [3D Camera Image Input].
3D posture
X/Y/Z/
ș
/
ij
/
ȥ
are calculated from X/Y/Z for each of
the 3 points. For X/Y/Z, the center of each point is
calculated, and for
ș
/
ij
/
ȥ
, the plane slope is calculated
using plane equations.
Method
3D posture
shift
The deviation between X/Y/Z for the 3 points on the
measurement image and X/Y/Z for the 3 points in the
model is calculated (the positional relationship
between two given planes, each including 3 points).
Summary of Contents for FZ2 Series
