Table: Identifier 1 and values
Setting data
Identifier 1
Set Value
Image logging
imageLogging
0: None
1: Only NG
2: All
Folder name as the
destination to save image
logging
imageLoggingDirectory
Folder name as the destination
(one-byte alphanumeric character)
Prefix of image logging
file name
imageLoggingHeader
Prefix of image logging file name
(one-byte alphanumeric character)
Data logging
dataLogging
0: None
1: Only NG
2: All
Name as the destination
folder to save data logging
dataLoggingDirectory
Folder name as the destination
(one-byte alphanumeric character)
(Example)
Command : SYSDATA Logging imageLogging delimiter
Gets current image logging setting
Response : 1 delimiter
OK delimiter
The current image logging setting is 1 (Only NG).
Function 2 ... Sets system data
Command SYSDATA <Identifier 0> <Identifier 1> <Set Value> delimiter
Response When executed properly
:OK delimiter
When not executed properly
:ER delimiter
Identifier 0 is "Logging".
Identifier 1 and values are as follows.
Table: Identifier 1 and values
Setting data
Identifier 1
Set Value
Image logging
imageLogging
0: None
1: Only NG
2: All
Folder name as the
imageLoggingDirectory Folder name as the destination
Summary of Contents for FZ2 Series
