Circle value 0 Circle evaluated value in camera 0or 2 image
Circle value 1 Circle evaluated value in camera 1or 3 image
Radius 0
Radius in camera 0or 2 image
Radius 1
Radius in camera 1or 3 image
Margin 1
Allowable deviation for camera 1 relative to camera 0. This item
specifies the allowable value for the relative camera shift that may occur
after 3D coordinates are set.
When three cameras are connected
Table: Text Displayed (3D Circle Search)
Item
Description
Judge
Judgement result
Measured
coordinate X
X coordinate of the position where the search circle is detected
Measured
coordinate Y
Y coordinate of the position where the search circle is detected
Measured
coordinate Z
Z coordinate of the position where the search circle is detected
Circle value 0
Camera 0 image circle evaluated value
Circle value 1
Camera 1 image circle evaluated value
Circle value 2
Camera 2 image circle evaluated value
Radius 0
Radius on the camera 0 image
Radius 1
Radius on the camera 1 image
Radius 2
Radius in camera 2 image
Margin 1
Allowable deviation for camera 1 relative to camera 0
Margin 2
Allowable deviation for camera 2 relative to camera 0
Accuracy
Specify this item only when three cameras are connected.
This item represents the allowable difference when the same
coordinates are measured with two systems: camera 0+1 and camera
0+2.
Summary of Contents for FZ2 Series
