background image

2

The following signal words are used in this manual. 

Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or 
may result in serious injury or death. Additionally there may be significant property damage. 

Meanings of Signal Words 

The following alert symbols are used in this manual. 

Meanings of Alert Symbols 

The following alert statements apply to the products in this manual. Each alert statement also appears at the locations needed in 
this manual to attract your attention.

Alert statements in this Manual 

Precautions for Safe Use 

WARNING

Indicate s general prohibition s for which there is no 
specific symbol. 

Indicate s the possibilit y of explosio n under specifi c 
conditions. 

This product is not designed or rated for ensuring safety of persons.
Do not use it for such purposes.

A lithium battery is built into the Controller and may occasionally combust, explode, or burn if not treated properly. Dispose of the Controller 
as industrial waste, and never disassemble, apply pressure that would deform, heat to 100°C or higher, or incinerate the Controller.

Since this product emits a visible light that may have an adverse affect on the eyes, do not stare directly into the light emitted 
from the LED. If a specular object is used, take care not to allow reflected light enter your eyes.

This product must be used according to the instruction manual. Failure to observe this may result in impairment of functions 
and performance of the product. 

WARNING

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury 
or in property damage. 

Indicates the possibility of injury by high temperature under specific conditions. 

Do not open the cover. Doing so may result in electric shock from internally used high voltages.

Indicates the possibility of electric shock under specific 
conditions. 

Danger of burns
Do not touch the case while the LED is ON or just after power is turned OFF, since it remains extremely hot.

8.5 mm max.

8.5 mm max.

Indicates the possibility of laser radiation. 

CAUTION

The Controller complies with the following standards.

EN61326-1

fz3_4ch_setup_E.book  Page 2  Friday, August 7, 2009  5:45 PM

Summary of Contents for FZ Series















Reviews: