Authorized Distributor:
OMRON Industrial Automation Global:
www.ia.omron.com
OMRON Corporation
Industrial Automation Company
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark, Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
Sensing Devices Division H.Q.
Application Sensors Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81) 75-344-7068/Fax: (81) 75-344-7107
In the interest of product improvement,
specifications are subject to change
without notice.
Controller Specifications
LCD integrated type: Touch pen, mouse etc.
BOX type: Mouse or similar device
RS-232C/422: 1 channel
Ethernet 100BASE-TX/10BASE-T
17 inputs (RESET, STEP0/ENCTRIG_Z0, STEP1/ENCTRIG_Z1, DSA0 to 1, ENCTRIG_A0 to 1,
ENCTRIG_B0 to 1, DI0 to 7)
29 outputs (RUN/BUSY1, BUSY0, GATE0 to 1, OR0 to 1, READY0 to 1, ERROR, STGOUT0 to 3, DO0 to 15)
LCD integrated type: Integrated Controller and 12.1 inch TFT color LCD
(Resolusion: XGA 1024
×
768)
BOX type: Analog RGB video output 1 channel (Resolusion: XGA 1024
×
768)
4 channels (supports USB1.1 and 2.0)
24 V DC (20.4 to 26.4 V DC)
Consumption of current varies depending on the type of camera connected.
When FZ-S_/FZ-SC_M/FZ-S_M is connected: Approx. 4.9 A max.
When FZ-SF_/FZ-SP_ is connected: Approx. 4.9 A max.
When FZ-SLC___/FZ-SZC___ is connected: Approx. 7.5 A max.
When FZD-STC2M is connected: Approx. 4.9 A max.
Between the group of external DC terminals and the ground terminal: 20M
Ω
min.
(DC100V megger, with internal surge absober removed)
Between the group of external DC terminals and the ground terminal: 1,000 VAC, 50/60 Hz
10 mA max.
2 kV, pulse rise: 5 ns Pulse width: 50 ns
Burst continuing time: 15 ms Cycle: 300 ms
10 to 150 Hz, one-side amplitude 0.1 mm (Max. acceleration 15m/s
2
)
10 times for 8 minutes for each three direction
150 m/s
2
; 3 times each in 6 directions
Operating: 0 to +50 °C (with no icing nor no condensation)
Ambient temperature specifiable. The cooling fan speed can be switched
according to the setting.
0 to +45 °C: Low speed, 0 to +50 °C: High speed
Storage: –20 to +65 °C (with no icing nor no condensation)
Operating and storage: 35 % to 85 % (no condensation)
No corrosive gases
D-type ground (ground resistance 100
Ω
or less) * conventional class 3 ground
IEC60529 IP20
Indoor use
Maximum altitude of 2,000 m
Supply voltage fluctuations of +10 %, –15 % of the rated voltage
Installation category I
Pollution degree 2
ABS
LCD integrated type: Approx. 3.4 kg Box type: Approx. 1.9 kg
Operation
Serial communications
Network communications
Parallel I/O
Monitor interface
USB interface
Power supply voltage
Current consumption
Insulation resistance
Dielectric strength
Leakage current
Noise resistance
Vibration resistance
Shock resistance
Ambient temperature
range
Ambient humidity range
Ambient environment
Ground
Degree of protection
Environmental conditions
(according to
IEC61010-1)
Case materials
Weight
fz3_4ch_setup_E.book Page 1 Friday, August 7, 2009 5:45 PM
