![background image](http://html.mh-extra.com/html/omron/e5gn/e5gn_manual_742661014.webp)
Digital Temperature Controllers
E5GN
13
Process value
Process value/set point
Multi-SP set point setting
SP ramp monitor
Run/stop
Alarm value 1
MV monitor (heating)
MV monitor (cooling)
Upper-limit alarm value 1
Set either of
these
parameters.
Lower-limit alarm value 1
Press the
O
key less than 1 s.
Press the
O
key less than 1 s.
AT execute/cancel
Communications writing
SP 1
Upper-limit
temperature input
Proportional band
SP 3
Temperature input shift
Derivative time
Integral time
SP 0
SP 2
at
off
cmwt
off
sp-0
0
sp-1
0
sp-2
0
sp-3
0
in5
0.0
insh
0.0
in5l
0.0
p
8.0
c
i
233
d
40
of-r
50.0
hys
1.0
chys
1.0
c
c
c
c
c
c
c
c
c
c-sc
1.00
c-db
0.0
c
Set either of
these
parameters.
25
25
100
m-sp
0
sp-m
0
r-5
run
al-1
0
al1h
0
al1l
0
o
0.0
c-o
0.0
c
c
c
c
c
c
oapt
0
icpt
1
wtpt
off
Power ON
Operation Level
Adjustment Level
Press the
O
+
M
keys for at least 1 s.
Press the
O
+
M
keys for at least 3 s.
Display flashes.
Protect Level
Operation/adjustment protection
Restricts displaying and modifying menus in
operation, adjustment, and manual control
levels.
Initial setting/communications protection
This protect level restricts movement to the
initial setting, communications setting, and
advanced function setting levels.
Setting change protection
Protects changes to setups by operating the
front panel keys.
Lower-limit
temperature input
Hysteresis (heating)
1-point shift
2-point shift
PID settings
Hysteresis (cooling)
Heating/cooling
Hysteresis
settings
SP used
by multi-SP
Cooling
coefficient
Dead band
Manual reset value
Clear the offset during
stabilization of P or PD control.
Added when PV display is added.
The time taken to move to the protect level can be adjusted by
changing the "Move to protect level time" setting.
Note: These diagrams show all the parameters that may be displayed. Depending on the specifications of the model used, there
may be some parameters that are not displayed.