Omron DST1 Series, Operation Manual

Page: 53 / 114

3-2 Remote I/O Allocations
3-1-3 Test Output Parameters
Parameter name Value Description Default
Not Used The corresponding test output is not
used.
Standard Output Specifies connecting to the input for a
muting lamp or PLC. Used as a monitor
output.
Pulse Test Output Specifies connecting a device with a
contact output in combination with the
safety input.
Power Supply Output Specifies connecting to the power supply
terminal of a safety sensor. The voltage
supplied from the test output to the I/O
power supply (V, G) is output.
S Test Output Mode
Muting Lamp Output
(Terminal T3 only) Specifies a muting lamp output.
When the output is ON, disconnection of
the muting lamp can be detected.
Not Used
Clear OFF Fault Action
Hold Last Data
Sets the output state of the test output
when a communications error occurs.
This parameter is enabled when the Test
Output Channel Mode is set to
Standard
Output or Muting Lamp Output .
Clear
OFF
I/O Comment 32 characters max. Sets an I/O comment for the test output.
The I/O comment set here is used as the
I/O tag in the Logic Editor. None
Time Maintenance
Counter Mode
Choice
Count
Sets the operating mode for the
maintenance counter. Time
Threshold
Maintenance
Counter 0 to 4,294,967,295
hours Sets the threshold value for the
maintenance counter.
0
3-4