5
Double-click
PositionControl
in the Multiview Explorer to display the program.
6
Change the value of
StartPg
variable for execution conditions of Servo ON, home
definition, and command value output to True to start positioning.
7
When you click the
Stop
Button (with write square icon) or the trace data becomes full,
the data trace operation will stop and the results will be displayed.
Confirm that you got the same trace results as the waveform shown in
1.2. The Servo
System Constructed in this Guide
and
2.2. Designing the Control Algorithm
.
32
Summary of Contents for DA0271
Page 38: ...2013 0613 W529 E1 01...