3.2.4. Creating the EtherCAT Network Configuration
You register a R88D-KN01L-ECT Servo Drive that operates as axis 0 on the EtherCAT network
configuration.
1
Double-click
EtherCAT
in the Multiview Explorer to display the EtherCAT Tab Page
where you edit the EtherCAT network configuration.
2
Drag the R88D-KN01L-ECT from the Toolbox to the master.
The Servo Drive is added under the master with a node address of 1.
Additional Information
To use digital I/O devices, analog I/O devices, and encoder input devices, add the
devices using the same procedure. For data access to the devices that you added,
register the device variables in the I/O Map.
The examples for using GX-AD0471 Analog Input Terminal and GX-DA0271 Analog
Output Terminal are provided as samples. Refer to the
Sample File No. 4
PLCCoderDemoMC_ADDA.mdl
and
No. 5 PLCCoderDemoMC_ADDA.smc
that are
provided separately.
23
Summary of Contents for DA0271
Page 38: ...2013 0613 W529 E1 01...
