OMRON ELECTRONICS LTD
●
Technical Support: 0870 752 0871 or visit www.myOMRON.com
31
Using the demonstration software;
The demonstration programs for the PLC and HMI are ‘universal’ and have been written
for any combination of the Lean Automation Kit.
On power-up, you will see the welcome screen below. The HMI’s system ‘beeper’ can be
disabled by pressing the speaker symbol in the bottom left corner.
Press “START”…
You will need to define your choice of connected hardware; this enables/disables parts of
the PLC program. Just touch the thumbnail picture of the products you have, and a ‘tick’
will appear to confirm its selection. These choices are retained within the PLC, so do not
need to be re-selected every time you re-power the system.
