OMRON ELECTRONICS LTD
●
Technical Support: 0870 752 0871 or visit www.myOMRON.com
30
From the left-hand side of the dialog box (“Mode”), select
USB
and check the
Application
,
Font
and
Firmware
boxes, as shown above.
Now click the
Download
button.
The
RUN
indicator light on the front of the NQ3 will flash blue to indicate that it is receiving
the project, and messages will be displayed to indicate the progress of the download.
When the bargraph reaches 100% and “Download Completed” is displayed (as per the
picture above), click
Close
.
At this point, the NQ3 HMI will reboot and, providing that the PLC software was
downloaded beforehand, will display the Lean Automation welcome screen, as shown at
the start of the next section.
As a double-check, the orange LED on the PLC’s RS232 option module (CP1W-CIF01),
should be flashing very rapidly, almost appearing to be permanently lit; this indicates that
communication is taking place between the HMI and PLC.
You are now ready to run the demonstration software!
