LVS-RIMS Quality Control Process Operations Manual Version 5.6.X
LVS-RIMS Quality Control Process Operations Manual Version 5.6.X
Page 5 of 35
LVS-RIMS and QC Overview
The LVS Roll Inspection Mapping System (RIMS) is designed for post press operation and allows the operator to
perform the following functions:
Produce an entire job, including multiple roll run of labels
Track every error on the job
Determine at the end of the run if the quality labels meet the job expectations and then run error changes
Splice and roll fix in an off-line operation (rewind/slitter device)
Additional features include:
Digitally Store All Errors
Accept or Reject Errors
Add Operator Notes
Full Audit Trail/Password Protected
21 CFR Part 11-Compliant Ready
Eliminate Manual Flagging, Inkjet Marks, Strobe Lights and other methods of marking and finding print
defects
Operation is simple; the standard LVS-7000is mounted to the press for print production and a tracking unit is
installed on each of the rewind units. Simply set the unique job name for each roll produced and print the labels.
The LVS-7000 tracks all errors (by electronic flagging) and records them for later review by LVS-RIMS. The
illustration on the next page shows the workflow of a job’s log file from the LVS-7000 to the Quality Control
Terminal and again to the LVS-RIMS system.
