Omnitracs MCP100 Installation Manual Download

Page: 27 / 256

80-J4866-2 Rev. G

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

2-7

Component Overview

Remote Control Device (RCD)

Remote Control Device (RCD)

An easily accessible in-cab device allowing drivers to easily manage message playback and
the text-to-speech (TTS) feature.

• Extended operating temperature range: -30C to +70C

(-22F to +158F).

• Storage temperature range: -40C to +85C (-40F to +185F).

• Small and easy to mount to the vehicle dash.

• Flexible mounting methods using either very high bond tape

(VHB) that sticks the RCD to the dash, or screws.

• Backlight keypad with navigation and other critical function keys.

Optional Accessories for the MCP100

Accessory

Chapter

Performance Monitoring system

Vehicle Maintenance

Trailer Tracks

Compact display unit

Buzzer

Remote message waiting light

Panic button

Wireless panic button

Printer

Scanner

Summary of Contents for MCP100

































































































































































































































































Search results

Summary of Contents for MCP100

Reviews:

Related manuals for MCP100

Brands by name

Popular brands

Omnitracs MCP100, Installation Manual

Search results

Summary of Contents for MCP100

Reviews:

Related manuals for MCP100

Brands by name

Popular brands