Installation Guidelines
In-Cab Scanner Installation
24-2
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
80-J4866-2 Rev. G
Installation Guidelines
Install the scanner in the cab of the vehicle in a location that is convenient and safe. This can
be on a vertical or horizontal surface. The scanner cannot obscure the driver’s view of the
road.
Mounting the Scanner
The scanner can be mounted in one of two ways.
Scanner Mounting Option
1.
Cut the dual-lock tape into four 2.5" sections.
2.
Clean the scanner bottom with an alcohol pad, remove protective film and apply two
dual-lock pieces to the bottom ends of the scanner.
3.
Clean the vehicle’s mounting surface with an alcohol pad.
4.
Remove protective film and apply two dual-lock pieces to the desired mounting surface.
Holster Mounting Option
1.
Select holster location.
2.
Clean the location with an alcohol pad and let dry.
3.
Carefully remove film from four VHB adhesive locations on holster.
4.
Position holster onto desired location and firmly press each corner to ensure contact
with the surface.
5.
Self-drilling screws can be installed for more support.
Installing the Scanner
1.
Remove the metal cover from the MAS USB/SER connector.
