Basic MCP100 System Verification Procedure
System Verification
12-18
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
80-J4866-2 Rev. G
8.
Tap the
GPS
tab.
Check that the Mode is 3-D or 2-D and that
the LAST UPDATE field is incrementing every
second.
• If the Mode is 3-D or 2-D and the LAST
UPDATE field is incrementing, go to
• If the Mode is No Fix, and the LAST
UPDATE field is not incrementing, perform
the diagnostic procedure in Chapter 10 in
the
MCP100 Diagnostic Guide.
9.
Tap the
Battery
tab. Tap the
Test Battery
button.
Note
It may take a few minutes to perform this test.
After the field updates, check that the last test
results are Good.
• If the results of last test are Good, go to
• If the results of last test are Bad, perform
the diagnostic procedure in Chapter 17 in
the
MCP100 Diagnostic Guide.
10.
Send a test message to the dispatcher. Go to
the Home screen and tap the
Messages
icon.
• Tap the
Create Msg
tab.
• Tap the
Free Form
button.
• Type the message text including the truck
number.
• Tap the
SEND
button.
• Tap
Yes
to send the message.
