uHow Often Should Inspections Be Performed?
Preventive Maintenance Inspection
E-2
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
80-J4866-2 Rev. G
u
How Often Should Inspections Be Performed?
• Omnitracs
recommends inspections be performed at least
once every 90 days.
• During normally scheduled vehicle preventive maintenance inspections.
Inspecting the Mobile Application Server (MAS)
1.
Make sure the compartment where the MAS is
installed has at least 1 inch of air space on
each side for cooling and at least 3 inches of
space for servicing the backup battery.
2.
Make sure there are 4 to 6 inches of air space
on the connector side to allow for cable bends
and servicing.
3.
Make sure tire chains, tools, and other
equipment are not stored on top of the MAS.
4.
Make sure the mounting hardware holding the
MAS in place is tight and does not allow the
MAS to vibrate.
Caution
Do not use a pneumatic tool as this could
damage the hardware. Use extreme
caution when working with power tools.
5.
Make sure the MCP100 display unit, TDM,
power, and accessory cables coming into the
compartment have enough slack and are not
pulling on the MAS connectors. Make sure the
cables are not being chafed or cut by sharp
edges.
1"
1"
3"
DSPL
SDM
I / 0
UI
PWR
05AAA_237A
