28
7. A nozzle check pattern will print on the front of the platen. It will look
like this:
a.
Tip 1
. You will see 4 channels of white and CYMK. This helps
you confirm that all 8 channels of ink are firing correctly.
b.
Tip 2
. The goal of this nozzle check is to see all 8 channels are
firing and since White ink is “heavier” than CMYK It is OK to see
some breaks in the lines, they will clear out during printing.
c.
Troubleshooting Tip.
If some channels are missing al together
it means there is not enough supply of ink to the print head yet
and you will need to perform the “ink charge” or partial ink
charge under section “IV Setting up the FreeJet320TX” and
perform some head cleanings from the Epson 2880 driver and
repeat the nozzle check.
