Omni8/16C/Omni8P User Manual
UMC1480R24.pdf
103
© Omniflex 2021
Holding /
Input Reg.
Coil /
Input
Status
DIT No.
Description
Read/
Write
233
N/A
232
Setup Common Relay Operation: Common Relay 1 (high byte) : Common Relay 2 (low byte)
Configure the operation of the four common fitted to the Common Services Card, labelled RL1, RL2, RL3 and
RL4. These relays can be configured for Horn operation or a selection of GA (Group Alarm) operations as
follows:
Relay Follows Input:
Relay Follows Alarm
Relay acts as ring-back horn
Relay acts as Multiple Reflash
Relay Follows ACK pushbutton
NOTE: Relay 1 can also be configured for watchdog operation.
R/W
234
N/A
233
Setup Common Relay Operation: Common Relay 3 (high byte) : Common Relay 4 (low byte)
R/W
235-236
N/A
234-235
Reserved
R/W
237
N/A
236
Setup Repeat Relay GA Operation: Repeat Relay 1 (high byte) : Repeat Relay 2 (low byte)
Configure the operation of the repeat relays fitted to the Repeat Relay cards when they have been configured for
“Acts as GA” operation in the Setup System Operation group.
In this case the relays can be configured for Horn operation or a selection of GA (Group Alarm) operations as
follows:
Relay Follows Input
Relay Follows Alarm
Relay acts as ring-back horn
Relay acts as Multiple Reflash
Relay Follows ACKnowledge pushbutton
238
N/A
237
Setup Repeat Relay GA Operation: Repeat Relay 3 (high byte) : Repeat Relay 4 (low byte)
R/W
239
N/A
238
Setup Repeat Relay GA Operation: Repeat Relay 5 (high byte) : Repeat Relay 6 (low byte)
R/W
