Omer Kar 350, Operation And Maintenance Manual

Page: 33 / 45

4.9 Checks before use
Having completed installation of the lift, the following test must be performed before it can be used for
work.
vvasa
TEST STANDARDS
1 Lift leveling Max. 0.5 mm per meter
2
GAP between the plates and the height of the
spring
(see: Check)
3 Sturdiness of anchors fastening to the floor Tightening torque (50 Nm or 37 Lb-Ft)
4 Pneumatic connections
Diagram (see: Pneumatic diagram paragraph) Air
leakage
5 Hydraulic connections
Diagram ( see: Hydraulic Diagram paragraph)
Oil leakage
Pressure
6 Wiring Diagram (see: Wiring Diagram)
7 Safety devices (See: Safety device features paragraph)
8
The compressed air system must be powered by
filtered and lubricated air
Presence of a filtering system
9 Oil level Oil level rod
10 Direction of rotation of motor Arrow on motor
11 Plant cable and piping protection Cable and pipe covers provided
12
In case of upstroke from opposite side to the
torsion bar
Presence of up ramp (optional)
13
Never load vehicles whose overall dimension
exceed those of the lift
Loading conditions (see paragraph: Loading
conditions)
14
Never load vehicles weighing more than the lift’s
nominal capacity
Capacity indicated on plate
DATE DATE SIGNATURE