Omega SS-015-NA, User Manual

Page: 29 / 34

9.5.2 Digital Device Byte
For digital I/O types, the Device Configuration field determines the signal types for each of the channel bits.
CHANNEL 0
SIG 2 (ENABLE) SIG 1 (RESET) SIG 0 (PULSE)
7 6 5 Description 4 3 Description 2 1 0 Description
0 0 0 N.O. SINK (DRY) 0 0 N.O. SINK (DRY) 0 0 0 N.O. SINK (DRY)
0 0 1 N.C. SINK (DRY) 0 1 N.C. SINK (DRY) 0 0 1 N.C. SINK (DRY)
0 1 0 N.O. SOURCE (WET) 1 0 N.O. SOURCE (WET) 0 1 0 N.O. SOURCE (WET)
0 1 1 N.C. SOURCE (WET) 1 1 N.C. SOURCE (WET) 0 1 1 N.C. SOURCE (WET)
1 0 0
COMPARATOR
(100 mV)
1 0 1
COMPARATOR
(500 mV)
1 1 0
COMPARATOR
(1.0 V)
1 1 1
COMPARATOR
(2.0 V)
9.5.3 Digital Sensor Parameters
There are no Digital Sensor Parameters.
9.5.4 Digital IPSO Definition
The IPSO Digital definition provides signal range, measured min/max values, IPSO object type information.
Offset Name Value Description
0x08a8 Sensor Type <table>
Value Description
3318 Frequency
33005 Pulse Width
33006 Pulse Delay
33015 Duty Cycle
33002 Counter
33003 Up/down Counter
0x08aa Precision 0 Provides reading of xxx
0x08ac Sensor Trigger ?? See Below
0x08b0 Min Measured ??
Minimum reading since the last
reset
0x08b4 Max Measured ??
Maximum reading since the last
reset
0x08b8 Min Range -8388607 Minimum reading
0x08bc Max Range +8388607 Maximum reading
9.5.4.1 Digital Precision
The measured digital value pr/- 1.0 resolution.
29 | P a g e