7
Connecting to your Layer N Gateway
The SS-015 easily connects to a Layer N Gateway with a one-button pairing feature. Follow the instructions below:
Figure 23: SS-015 without top cover
Step 1:
Push the pairing button once on your SS-015. The LED Status Indicator will blink green repeatedly indicating it is
Pairing Mode.
Step 2:
Push the pairing button once on the Layer N Gateway. The LED on the Gateway will blink green repeatedly
while it searches for the SS-015.
When the SS-015 has been successfully paired to the Layer N Gateway, the LED on both devices will stop blinking, and a
green LED will blink periodically on the SS-015 each time data is transmitted to the Gateway. Once the pairing process is
complete, replace the cover of the SS-015 and fasten the four screws securely.
8
Layer N Cloud Interface
Once the SS-015 has successfully paired to the Gateway, the SS-015 readings will appear on the Layer N Cloud interface.
The transmission interval can be adjusted from the Layer N Cloud interface page.
Step 1:
Log in to the Layer N Cloud homepage and click on the SS-015 unit that will have its transmission interval
adjusted.
Step 2:
Click the
Settings
icon.
Step 3
: Adjust the
Sensor Properties
to fit the configuration needs.
Once all configurations are complete, the Layer N SS-015 setup process is complete.
Pairing
Button
LED Status
Indicator
2
1
|
P a g e
