The remote engine starting feature should not be used when
the vehicle is parked in an enclosed structure or garage!
Black Wire - (Ground):
The Black wire provides Negative ground for the
RS-6's operation; proper connection is important.
CONNECTION:
Using the correctly sized crimp-on ring terminal, connect the Black
wire to the metal frame of the vehicle, preferably using an existing machine-threaded
fastener. Make sure that the ring terminal attached to the Black wire has contact with bright,
clean metal. If necessary, scrape any paint, rust or grease away from the connection point
until the metal is bright and clean.
Mounting the Control Module:
Choose the mounting location and route all wiring accordingly . . . the final mounting
of the control module should be done after having made all wiring connections and testing
the RS-6's operation. Always securely mount this module in the vehicle's interior com-
partment, never in the engine compartment. Ensure that moisture, vibration and tempera-
ture extremes are minimized. Acceptable locations include mounting behind the dash,
behind the glovebox or other interior panels.
Main Wiring Harness Connections -
5 Primary Wires
Summary of Contents for RS-6
Page 27: ......
