8-Wire Connector
Page - 11
Yellow/Black Wire - (Positive Brake Input):
The Yellow/Black wire
must be connected. It is a critical safety feature which disables remote starting operations
whenever the brake pedal is pressed.
CONNECTION:
Connect the Yellow/Black wire to the brake switch wire which shows
Positive 12 Volts when the brake pedal is pressed. The brake switch is typically located
above the brake pedal, and usually mounted to the brake pedal support bracket. Always
make this connection in a fashion ensuring its long-term reliability; soldering is highly
recommended.
Upon completing the installation, always test the Yellow/Black wire's operation. At-
tempt to remotely start the vehicle while holding the brake pedal depressed; the system
should not respond. Release the brake pedal and remotely start the engine. Once running,
pressing the brake pedal should stop the engine. Always perform this test before testing
the neutral safety input.
White/Blue Wire - (Neutral Safety Input):
This circuit is another criti-
cal safety feature which enables the system's remote start operations. Connect the White/
Blue wire to the vehicle's Negative neutral safety wire.
CONNECTION:
The target wire will show Negative Ground whenever the gear se-
lector is in the "Park" or "Neutral" positions. Once the target wire is located, securely
connect the White/Blue wire to it.
Summary of Contents for RS-6
Page 27: ......
