manualshive.com logo in svg

Omega OMP-MODL, User Manual, Page: 92 / 297

Share
Download
Omega OMP-MODL User Manual Download Page 92

5...  H

YPER

C

OMM

™ C

OMMUNICATIONS

U

SING THE 

OMP-MODL

5-5

  Baud:

Specify the baud rate rate that will be used to communicate between
the PC and the local modem.  Set this baud rate per the following
table:

FYI:

  The remote modem (at the logger) will automatically

adapt to the baud rate of the calling modem.

  Redial:

If this box is checked, HyperWare will automatically make another
attempt to call the logger if the first attempt fails for any reason.
The time specified in the edit box is a delay time to wait before
attempting the next call.

Figure 5... -3:  Serial Communications setup dialog box (Modem mode)

Local Modem Capability

Set Dialog Box Baud To:

1200 baud

1200 baud

2400 baud

2400 baud

9600 or faster baud

19,200 baud

Table 5... -1: Local modem settings

Summary of Contents for OMP-MODL










































































































































































































































































































Reviews:

No comments