manualshive.com logo in svg

Omega OMP-MODL, User Manual, Page: 10 / 297

Share
Download
Omega OMP-MODL User Manual Download Page 10

2...   OMP-MODL System Base

Using the OMP-MODL

2-1

2...   OMP-MODL S

YSTEM 

B

ASE

  S

YSTEM 

B

ASE 

O

VERVIEW

System Base

 refers to the main data logger unit composed of a stack of two

interconnected modules... the MLCPU-1 module and the MLAD-1 module.  These
two modules combined house the main microprocessor and support circuitry,
memory, power supplies, A to D converter as well as 6 inputs (4 analog, 1 Cold
Junction Compensation temperature and 1 digital) and 4 outputs.  The System Base
can be used stand-alone as a 6 input / 4 output data logger (i.e. the OMP-MNL) or
expanded with the addition of Interface Modules, battery packs, and/or display
modules in the case of the OMP-MODL model.  Additional modules are covered in
the following chapter.

The System Base includes a connector bus that provides signal connections to any
added Interface Modules.

  E

NCLOSURE 

/ M

OUNTING

The OMP-MODL (Figure 2...  -1) is built up by plugging together a combination of
modular layers.  A top plate (or display module ML-DISP) is then fastened to the top
and a bottom plate/hanger is fastened to the bottom of the stack to complete the

ML-TOP
TOP PLATE

MLADC-1

MLCPU-1

ML-BACK
BOTTOM PLATE/HANGER

ML001

Figure 2...  -1: System Base Assembly

Summary of Contents for OMP-MODL










































































































































































































































































































Reviews:

No comments