manualshive.com logo in svg

Omega OMP-MODL, User Manual, Page: 147 / 297

Share
Download
Omega OMP-MODL User Manual Download Page 147

9... H

YPER

P

LOT

™ G

RAPHIC 

D

ATA 

D

ISPLAY

U

SING THE 

OMP-MODL

9-6

  C

HANNEL 

N

AME

The individual data channel names from the OMP-MODL
Download file are listed.  The names are assigned when
developing a HyperNet and/or Post-Processing Net.

  D

ISPLAY 

C

HANNEL

Checking a data channel’s checkbox results in that channel being
plotted.

  D

ISPLAY 

G

RID

A row of radio buttons specifies to which channel’s Y-axis the
horizontal grid should be connected.

  D

ISPLAY 

Y-A

XIS

Checking a data channel’s Y-Axis checkbox results in that
channels Y-Axis being displayed.  In many plots, it may only be
necessary to display a single Y-axis if the scaling is the same for
all channels.  For example if four channels of temperature data
are being plotted and they all are scaled from 0 to 100F, only a
single Y-Axis is required, allowing more area for data display.

  D

ISPLAY 

S

YMBOLS

Check boxes are provided for the enabling of symbols for each
displayed channel.

  S

CALING 

A

UTO 

/ M

ANUAL

When a OMP-MODL Download file  is first plotted, all channels
are autoscaled to fit on the screen.  This auto-scaling feature can
be disabled by the User and a manual range specified by clicking
the Manual checkbox and entering a High and Low limit in the

Manual Ranges

 text boxes.  (As a short-cut, editing of the

Figure 9...  -5:  Y-Axis configuration dialog

Summary of Contents for OMP-MODL










































































































































































































































































































Reviews:

No comments