manualshive.com logo in svg

Omega OMP-MODL, User Manual, Page: 158 / 297

Share
Download
Omega OMP-MODL User Manual Download Page 158

10... H

YPER

T

RACK

™ R

EAL

-T

IME 

D

ATA 

D

ISPLAY

U

SING THE 

OMP-MODL

10-9

  Trending Configuration Dialog

By double-clicking anywhere on the Trending Display Window, a
Configuration Dialog is displayed (Figure 10...  -12).  This dialog allows for
various User settings for the data display.

NOTE: After changing any of the following settings,

the Tracking session must be Stopped (click on the

Stop Sign Button) and restarted (Green Flag).

Changing any of the following settings during a

Tracking session will result in a refresh of the

display and clearing of buffered data.

  Time Display Formats

Time is displayed on the horizontal axis and can be set for either
Elapsed time since the start of the Track session (the default), or
Absolute, in which the absolute calendar date and time is displayed.
To select Absolute, click on the Display Absolute Date/Time check-
box.

Figure 10...  -12: Real Time Trending Configuration dialog

Summary of Contents for OMP-MODL










































































































































































































































































































Reviews:

No comments