Omega MC-1, Operations & Installation Manual

Page: 9 / 13

Page 8
The alarm has 7 programmable features which allow it to be customized to suite
many individual needs. The following pages provide a brief explanation for each
feature, and notes its factory default setting.
• = Default Factory Setting
1. PIN Code: (• 1 - 9)
- Press the Controller “Arm” button equal to the desired customized PIN Code,
but wait, after each button press for a single Status Light flash and horn chirp
confirmation. When you reach the disired number, wait for the siren to chirp the
complete total number or presses.
Example: For a PIN Code of “3 presses”, programming would be: enter Program-
mable Features Mode, select “feature 1” and the unit will chirp 1 time. Press “Arm”
button 3 times and the unit will chirp for each button press. Now wait 2 seconds until
the unit chirps 3 times. Exit programming mode, and the PIN Code is now 3 presses
of the Valet switch.
Programmable Features
6. Chirp Volume: ( •Med = 1 siren chirp / Low = 2 chirps / High = 3 chirps)
- This feature allows the user to adjust the siren output volume when arming and
disarming.
- Pressing the “Arm” button makes the siren duration set to Medium, pressing the
“Disarm” button makes the siren duration set to the Lowest setting, and pressing
the “••” button extends the time to the Highest setting.
5. Siren Chirps: ( •On = 1 siren chirp / Off = 2 chirps / On Demand = 3 chirps)
- This feature allows the user to turn the siren chirps on/ off or to be On Demand.
- On Demand can be controlled by double pressing the “Arm” or “Disarm” buttons
when arming or diarming the alarm.
- Pressing the “Arm” button turns the feature on, pressing the “Disarm” button
turns the feature off, and pressing the “••” button turns the On Demand feature on.
2. Automatic Arming: ( On = 1 siren chirp / •Off = 2 chirps)
- Allows the Alarm to arm itself 30 seconds after ignition is turned off.
4. Horn Chirp: ( •On = 1 siren chirp / Off = 2 chirps/ On Demand = 3 chirps)
- This feature configures the alarm’s Brown/White wires to be toggled On, Off
or on demand. The “Arm” Button turns this feature on, the “Disarm” Button turns
this feature off, and the “••” Button makes it On Demand. Please refer to page
11 for wiring instructions.
3. Automatic Rearming: ( On = 1 siren chirp / •Off = 2 chirps)
- Allows the alarm to rearm itself 90 seconds after it is has been disarmed.
Automatic Rearming is confirmed by a fast flashing Status Light after disarming.