The system may be "Disarmed" by any of 2 methods:
1)
Remote Control Disarming: Press & Release the “Disarm” button
Upon Disarm: • The siren will chirp twice.
(4 chirps if alarm has activated & reset)
• The parking lights will flash twice.
(4 times if alarm has activated)
• The starter interrupt will disengage.
• The LED Status Indicator turns off
Disarming the Alarm
2) Emergency Override:
THEN WITHIN
10 SECONDS
Page 3
Step 1:
With the system in the armed condition use your key, turn the
ignition to the "On" position.
Step 2:
Within 10 seconds, Press & Release the Valet/ Override Switch.
System Armed & Activated
Regardless of the method used to Arm the alarm, once Armed, the alarm will
monitor all protected zones, and if an intrusion attempt is detected it will activate,
or “trigger”.
A trigger consists of the following:
• The electronic siren will start sounding.
• The parking lights will flash on and off repeatedly.
An activation has a 30 second duration unless the system is disarmed using the
remote control or the Valet /Override switch. If all protected zones are secure at
the end of the trigger, the system will stop and rearm itself to detect further entry
attempts. If a protected zone is still open at the end of the trigger cycle, the alarm
will continue to re-trigger itself for up to six activated cycles before it resets itself
and ignores the violated zone.
Summary of Contents for MC-1
Page 13: ...Page 12...
