Omega MC-1, Operations & Installation Manual

Page: 3 / 13

Page 2
The system may be "Armed" by any of 3 methods:
1)
Remote Control Arming: Press & Release the “Arm” button
Arming the Alarm
Upon Arming: • The siren will chirp one time.
• The parking lights will flash once.
• The starter interrupt will engage.
• The LED Status Indicator will begin to flash slowly.
2) Automatic Arming: Turn Ignition “Off”.
“Automatic Arming” is a programmable feature which allows the alarm to arm
itself if desired.
If on, anytime the ignition is turned off:
• The Siren will chirp once to confirm arming countdown has begun.
• The LED Status Indicator will begin to flash rapidly.
Thirty seconds later:
• The siren will chirp & the lights will flash once.
• The LED Status Indicator will begin to flash slowly.
• The starter interrupt will engage.
- The alarm is now fully armed
- Once it is disarmed it will not automatically arm again.
This feature is turned off by default. See page 8 for programming instructions.
3) Automatic Rearming: Press & Release “Disarm” button
“Automatic Rearming” is a programmable feature which ensures that your sys-
tem is never inadvertently disarmed. It is possible to accidentally or unknowingly
operate the controller or transmitter from a pocket or purse. Automatic Rearming
will rearm the alarm 90 seconds after it is has been disarmed, unless the ignition
key is turned on. Automatic Rearming is confirmed by a fast flashing Status Light
after the disarming.
This feature is turned off by default. See page 8 for programming instructions.