![background image](http://html1.mh-extra.com/html/omega/hos-ms420/hos-ms420_user-manual_737634031.webp)
30
V5.1
‐
March
2010
The following Table describes the
Vertical Channel
menu:
Function
menu
Setting
Description
Coupling
AC
DC
The dc component in the input signal is blocked
The ac and dc components of the input signal are available
Channel
OFF
ON
Close the channel
Open the channel
Probe
1X
10X
100X
1000X
Select the desired probe attenuation
Inverted
OFF
ON
Waveform is displayed normally
Open the
Invert
function for the waveform setting
S
ETTING THE
C
HANNEL
C
OUPLING
CH1 will be used in this example.
Press
F1 Coupling
and
then
AC
to set AC coupling. The DC component contained
in the tested signal is blocked.
Press
F1 Coupling
and
then
DC
to set DC coupling. Both DC and AC components
contained in the tested signal are permitted.
Refer to Figures 20 and 21.
Summary of Contents for HOS-MS420
