Omega HOS-MS420 User Manual Download Page 9

Page: 9 / 110

V5.1

‐

March

2010

applications and as V dc for DC applications. Overvoltage Category II refers
to local level applicable for appliances and portable equipment.

Only qualified technical personnel should perform maintenance on these
devices.

Observe the nominal value limits for all terminals:

To avoid fire or electric shock,

observe all nominal value limits, markings, and specifications for this product. Before
connecting to this product, carefully read the user’s manual.

Do no operate this instrument without the cover plate secured:

If the cover plate

or panel has been removed, do not use this product.

Do not touch bare conductors

Do not use this meter in case of any undetermined failure:

When in doubt

consult qualified repair personnel

Do not hinder the meter’s ventilation:

Refer to the user manual for detailed

installation instructions and proper setup for adequate ventilation

Do not operate this meter in overly humid environments.

Do not operate this meter in potentially explosive environments.

Keep the meter’s surface clean and dry.

Use of this device in any manner inconsistent with the uses specified in this manual
can possibly compromise the safety protection provided by the meter.

Summary of Contents for HOS-MS420















































































































Search results

Summary of Contents for HOS-MS420

Reviews:

Omega HOS-MS420, User Manual, Page: 9 / 110

Search results

Summary of Contents for HOS-MS420

Reviews: