![background image](http://html1.mh-extra.com/html/omega/hos-ms420/hos-ms420_user-manual_737634056.webp)
55
V5.1
‐
March
2010
options will then appear at the bottom of the screen
3. Press
the
F1
key to select the frequency measurement of
CH1.
The measurement
window will appear red in color and show the frequency of CH1
4. Press
the
MENU
▲
or
MENU
▼
key to select
MEAS SET 2
. Five (5) selectable
options will then appear at the bottom of the screen
5. Press the
F4
key to select the peak-to-peak value of
CH2
. The measurement
window will appear blue in color and show the peak-to-peak value of CH2
Figure 31: Automatic Measurements
Autoscale
Autoscale enables the instrument to automatically configure the trigger
mode, voltage division and time scale according to the type, amplitude and
frequency of a signal.
The menu is as follows:
Function Menu
Setting
Instruction
Autoscale
OFF
ON
Turn OFF
Autoscale
Turn ON
Autoscale
Mode
Vertical
Adjust vertical scale without
Summary of Contents for HOS-MS420
