![background image](http://html2.mh-extra.com/html/omega/compact-cal-ca100/compact-cal-ca100_owners-manual_5154776039.webp)
38
Setting
1
Press the [NEXT ENTER] key with the [ZERO CLR] key pressed.
[SP FC] and [End] are displayed.
2
Press [ ] or [ ] until [End] on the lower line of the display changes to [Com], and
then press the [NEXT ENTER] key.
The communication menu appears.
3
Press [ ] or [ ] to turn the communication power supply from [oFF] to [on], and
press the [NEXT ENTER] key. Selecting [oFF] disables the communication
function to be set.
4
Select a communication mode using [ ] or [ ] and press [NEXT ENTER].
5
If the Normal mode is selected, jump to step
6
.
If the talk-only mode or printer mode is selected, specify a cycle between 0 to 3,600
seconds using [ ] or [ ] and press [NEXT ENTER].
6
Select handshaking using [ ] or [ ] and press [NEXT ENTER] (see page 36).
7
Select the data format using [ ] or [ ] and press [NEXT ENTER] (see page 37).
8
Select the baud rate using [ ] or [ ] and press [NEXT ENTER].
9
Select the terminator using [ ] or [ ] and press [NEXT ENTER].
The settings related to communication have been completed. The display returns to
the initial setting communication menu.
10
Display "End" using [ ] or [ ] and press [NEXT ENTER].
This returns to the measurement/generation screen.
Free Datasheet http://www.datasheet-pdf.com/