![background image](http://html2.mh-extra.com/html/omega/compact-cal-ca100/compact-cal-ca100_owners-manual_5154776017.webp)
16
Installing Dry Cells
CAUTION
When using dry cells, observe the following precautions:
• The use of AA alkaline cells is recommended.
• When inserting a battery, observe the polarity; otherwise, a liquid
spill or explosion may occur.
• Before operating the instrument, make sure that the dry cell
holder is inserted into the body and the back cover is closed.
• Do not disassemble, heat, or throw a battery into a fire.
• Do not short out a cell.
• Do not charge a dry cell.
• Do not solder a line onto a dry cell.
• Use new dry cells from the same manufacturer.
• When dry cells become weak, replace all eight cells with new
ones.
• If the instrument will not be used for a long time, remove the dry
cells.
Installation
1
Make sure that the power switch on the front panel is turned off and no AC power
supply kit is connected..
2
Remove the cover of the dry cell storage on the back of the body.
3
Insert the eight dry cells into the dry cell holder. Make sure that they are seated in
the correct indicated direction of polarity (refer to the following diagram).
4
Attach the dry cell holder to the body and push the connector until it hits the bottom
of the receiving side of the body (refer to the following diagram).
5
Reassemble the cover.
Strap
Cable
To remove dry cells, pull the strap to unplug the connector from the dry cell storage and
remove the dry cell holder. Do not pull on the cable of the connector.
Free Datasheet http://www.datasheet-pdf.com/