11. Use and maintenance manual
B01.26 - B02.40 - B02.10
San Maurizio C.se - 01/09/2021
www.omcr.it
Before each lifting, handling or overturning application of the die make sure that the lifting
brackets are mounted correctly! The lifting bracket
HAS
to be mounted
with the safety ring
positioned in direction of the die axis: after inserting it, be sure that the safety ring is mounted
correct so that an accidental extraction of the pin is impossible; check the movement of the
safety ring
by verifying the eccentricity “E” in reference to the pin (see
Pic.5
).
WARNING
3.5 - PINS ASSEMBLY INSTRUCTIONS
Pic.5
E
OMCR CODE
COMPOSTO DA
CODICE
PERNO
B01.26.08000A
B012608000A-01
B02.10.50
B012608000A-02
B02.10.50
B01.26.08000B
B012608000B-01
B02.10.50
B012608000B-02
B02.10.50
B01.26.14000A
B012614000A-01
B02.40.80
B012608000A-02
B02.10.50
B01.26.14000B
B012614000B-01
B02.40.80
B012608000B-02
B02.10.50
Before each lifting, handling or turnover make sure that the load capacity of the lifting brackets
is capable of and according to the weight of the die. The maximum load/lifting capacity, the
work order number, the part number, the brand label and the EC label are indelible marked
on the lifting brackets. (see
Pic.6
).
NOTE:
the work order numbers of lifting brackets and pins are not necessarily corresponding
WARNING
3.6.1 - MARKER FOR LIFTING CAPACITY “B01.26......-01”
Pic.6
MAXIMUM CAPACITY LOAD
CONSTRUCTOR
EC MARK
PRODUCT CODE
LIFTING PIN MARK
WORK ORDER NUMBER
