8. Use and maintenance manual
B01.26 - B02.40 - B02.10
San Maurizio C.se - 01/09/2021
www.omcr.it
Prior to assembly check the correct torque to tighten the screws. In the table below you will find the
different types of screws and the related torque in order to mount the lifting brackets.
It is required/
to use LOCTITE 243 or lock washers to secure the screws. The necessary screw in depth is 1
x diameter of the screw and it needs to be mounted to steel (minimum quality Fe510, S355).
Example: for a M36 screw the minimum screw in depth is 36mm.
WARNING
3.3
3.4.1 - ASSEMBLY B01.26.08000A-01 and B01.26.08000B-01
WARNING
Failure to observe the regulations listed in these instructions can cause the load to fall.
B01.26.08000A-01 and B01.26.08000B-01 lifting brackets have to be mounted on steel
plates (minimum quality S355),
with
C14.21.202080 locating pins
. It is recommended to
provide barriers to avoid the wrong pins insertion
(see
Pic.1
).
WARNING
3.4
Pic.1
DIN 912 CL.12.9
LIFTING BRACKET
B02.10.50
PIN INSERTION DIRECTION
DIE AXIS
DIN 912 CL.8.8
KEYS C14.21.202080
LIFTING
BRACKET ART.
NUM.
COMPOSED
OF
NR. SCREWS
SCREWS DIN 912
CL. 12.9
CLAMPING COUPLE
[Nm]
B01.26.08000A
B01.26.08000A-01
5
M24x140
1196
B01.26.08000A-02
5
M24x110
B01.26.08000B
B01.26.08000B-01
5
M24x140
B01.26.08000B-02
5
M24x110
B01.26.14000A
B01.26.14000A-01
6
M24x140
B01.26.08000A-02
5
M24x110
B01.26.14000B
B01.26.14000B-01
6
M24x140
B01.26.08000B-02
5
M24x110
