13. Use and maintenance manual
B01.26 - B02.40 - B02.10
San Maurizio C.se - 01/09/2021
www.omcr.it
To prevent an accidental extraction of the pin during a lifting, don’t make lifting, handling
or overturning application by using a sling, the angle can’t be bigger than 90 degree to the
horizontal die axis.(see
Pic.8
).
WARNING
3.8
DIE AXIS
DIE AXIS
Pic.8
MAX 90°
MIN 50°
< 50°
Before each lifting, handling or overturning application make sure, that the equipment
(brackets, hooks, chains, ropes, etc.) has no deformation or other signs of damage which
would make it unsafe to use. Otherwise
replace the damaged equipment immediately!
WARNING
3.7
Before each lifting, handling or overturning of the die be sure that:
the ropes / chains are secured in correct way;
the ropes / chains are not in contact with cutting edge;
the ropes / chains are not hooked to the die corners.
WARNING
3.9