3. Use and maintenance manual
B01.26 - B02.40 - B02.10
San Maurizio C.se - 01/09/2021
www.omcr.it
1. RISK EVALUATION
The matters of following pages refer to a classic use of lifting brackets and they can’t forecast unspecified
applications. For this reason each user must provide to his own risk evaluation and he must consider this
manual as general reference support and as a summary of possible matters. To define the employ-procedures,
to spread information and to check the compliance of these ones it’s a duty and a responsibility of the user.
The lifting brackets have to be used as couplets for ropes and chains and they allow users to make on safety
the following actions: LIFTING, HANDLING; the material, the production and the quality-check of all OMCR
lifting pins comply with the Directive
2006/42/EC
requirements; all OMCR lifting elements have been tested
with a static safety factor even to a minimum 1.5, all materials have been analyzed according to
UNI EN 10204
,
samples of all materials have been subjected to tensile stress test according to
UNI EN 10002
.
Calculations and Risk valuations are in compliance with BMW norm B2.5605.012.
2. SYMBOLS AND WARNINGS CLASSIFICATION
Before using the lifting bracket pay close attention to this USE and MAINTENANCE MANUAL. An improper or
other use of the parts then mentioned and described in this manual, releases OMCR from any responsibility.
WARNING
NOTE
WARNING
WARNING
It indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
It indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
It indicates advices and other information of importance.
It indicates general warning symbol.
It indicates hazard of crushing consequent to an accidental fall or overturning of
the load.
Indicates a risk of shearing due to an accidental fall or overturning of the load.
It indicates a risk for musculoskeletal disorder due to the handling of the loads.
It indicates forbidden actions or uses.
It indicates mandatory actions to avoid hazards.
It indicates an area where it is forbidden to stay or cross.
The following safety messages and symbols in this use and maintenance manual are confirm to ISO 3864-2,
ANSI Z535.6, ANSIZ535.4 norms, in this manual are classified the following safety messages and symbols:
