Olympus SC1, Instruction Manual

Page: 31 / 121

3.3 Mounting the cradle
25 SC-1 INSTRUCTION MANUAL
Ch.3
CAUTION
• Make sure the clamping screws that secure the cradle to the system control arm
have been properly tightened. Otherwise the cradle may fall off and it could cause
damage to the tablet and accessories.
• Use a monitor arm with sufficient load resistance to support the weight of the tablet
and cradle. If the tablet and cradle fall or drop, operator injury and/or tablet and
accessories damage may result.
• When placing the cradle on the adjustable arm, consider the range of movement of
the cradle. Cradle may hit equipment around and it could result in equipment
damage.
• Be very careful not to catch your finger or other body parts when placing the cradle
on the system control arm. Otherwise it may cause injury.

Mounting the cradle
3.3 Mounting the cradle
Attach the cradle to system control arm.
• Refer to instruction manual for system
control arm (MAJ-2151).
• 4 screw holes on the back of the cradle to be
used.
• Cradle to be fixed to the system control arm
with 4 screws packaged with the cradle.
Figure 3.1
Screw
holes