manualshive.com logo in svg

Olympus SC1, Instruction Manual

Share
Download
Olympus SC1 Instruction Manual Download Page 32

26

3.4 Connection to the power supply

SC-1 INSTRUCTION MANUAL

Ch.3

WARNING

• Always keep the AC adapter and power cord dry. Otherwise it may cause an 

electric shock.

• Do not excessively bend, pull, or twist the AC adapter cord or power cord. 

Otherwise equipment damage including separation of the power plug and 

disconnection of the cord wire as well as a fire or an electric shock may result.

• Check “

Specifications” on page 85 and avoid overloading the cables and power 

outlet. Otherwise electric shock, fire and/or equipment damage may occur.

• Supply power to all the equipment from a power outlet with a grounding electrode. 

Otherwise an electric shock and/or equipment damage may occur.

• Take appropriate measures to protect against a power surge that can occur due to 

lightning. Failure to do so may result in an electric shock and/or equipment 

damage.

CAUTION

Power cord should be plugged in an easy-to-reach outlet, or power supply should 

be able to be disconnected from the whole system in which the tablet is set. 

Otherwise it may cause electric shock, fire, and/or damage of equipments.

3.4

Connection to the power supply

Summary of Contents for SC1


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands